Contactors

• Across the line contactors
• Definite purpose contactors
• Drive contactors
• Lighting contactors
• Welding contactors
• AC Switching contactor

AS-Interface

The Actuator-Sensor-Interface is an open, non-proprietary bus system. Actuators and sensors are connected to programmable logic controllers using a non-shielded 2-wire cable – data and power are simultaneously transferred.

Remote I/O- IP20 & IP65

• IP 65 / 67
• Intrinsically Safe
• Fail Safe
• Distributed I/O

Sensors

• Proximity Switches
• Fail Safe Sensors
• RFID Systems
• Image Processing Systems

Overload Relays

• Thermal overload relays
• DC Switching contactors
• Bar contactors
• Electronic overload relays

IEC control – Motor Starter

• Size S00 - overall width 45 mm, max. rated current 12 A,
  at voltages of 400 V AC suitable for 3-phase induction motors up to 5.5 kW.
• Size S0 - overall width 45 mm, max. rated current 25 A,
  at voltages of 400 V AC suitable for 3-phase induction motors up to 11 kW.
• Size S2 - overall width 55 mm, max. rated current 50 A,
  at voltages of 400 V AC suitable for 3-phase induction motors up to 22 kW.
• Size S3 - overall width 70 mm, max. rated current 100 A,
  at voltages of 400 V AC suitable for 3-phase induction motors up to 45 kW.

Cam Switches

• On / Off
• Padlock able
• Pushbutton Interlock
• Motor Control

• Laser Scanners
• Interlock Switches
• Safety PLC
• Light Curtins
• Safety Relays
• Signal & Stack Lights

Furnas Electric has a full line of Industrial controls.

• Definite purpose controller
• Contactors
• Starters
• Switches

• SIEMENS Drives
• SIEMENS NEMA Motors
• SIEMENS Controls