DC514C Drive

TECHICAL SPECIFICATIONS

Switch Selectable Supply Power
Single Phase 110Vac ±10%
Single Phase 220Vac ±10%
Single Phase 380Vac ±10%
Single Phase 480Vac ±10%
50-60Hz ±5%

Ambient Temperature
0-40°C

TECHNICAL CHARACTERISTICS

Motor Protection
Stall condition 15 seconds internal
Electronic Overload Protection

Overload
150% for 60 seconds

Available Field Current
Up to 3A D.C.

Available Frame Sizes
4, 8, 16 and 32 ampere

INPUTS/OUTPUTS

Analogue Inputs
Ramp input
Reference input - positive
Reference input - negative
Tachometer feedback
Current limit
Current reference
Minimum speed
Thermistor input

Analogue Outputs
Speed
Load
Current reference
Ramp output
Total reference
Total reference inverted
Reference supplies ±10V DC and +24VDC

Digital Inputs
Run (Active)
Stall enable

Digital Outputs
Zero speed
At stall condition
Healthy

INTERNATIONAL CODE

The 514C series drive complies with UL508C and complies to standard code when installed in accordance to manufacturers installation manual.

EN50178
(Protection Low Voltage Directive)

EN50081-1 (1992)
(Emission in ambient EMC)

EN50082-2 (1995)
(Immune in industrial EMC environment)

Complies with CE, UL e c-UL

Isolated input Circuitry

Multiple inputs for reference speed/current

Integrated pilot relay for main contactor

Integrated Field Supply

Extremely linear control loops

OPTIONS

EMC filter

Line reactors for European and
North American markets (UL-CSA)

POTENTIOMETERS

Maximum speed

Minimum speed

Current limit

Acceleration rate (1-40s)

Deceleration rate (1-40s)

Current Proportional Gain

Current integral Gain

Speed Proportional Gain

Speed Integral gain

I.R. Compensation

Zero Speed Threshold

Zero speed offset

SWITCH SELECTIONS

Speed Calibration

Tachometer/Armature Voltage Feedback Select

At zero speed

Output current bipolar/unipolar

Ramp isolate

Stall logic On/Off

Current reference input/output

Over-current trip

Set-point comparator

• 890 Eurotherm AC
• 690+ Eurotherm AC
• 650V Eurotherm AC
• 650 Eurotherm AC
• 590+ Eurotherm DC
• 506/507/508 Eurotherm DC
• 512C Eurotherm DC
• 514C Eurotherm DC