Eurotherm Drives, Parker Drives, SSD Drives, VFD, Inverter, AC / DC Drive

Parker / SSD 890 Eurotherm AC Drives

AC890 System Drives can control everything from induction motors to servo motors. AC890 provides V/F, sensorless vector, closed-loop flux vector and servo position control; from simple AC motor control sections to more demanding sections.

• V/Hz, Sensorless Vector, Vector, Servo and Regen,
• 230VAC (1-60HP)
• 460VAC (1-1500HP)

Parker / SSD 690+ Eurotherm AC Drives

The 690+ Drive series is a single range of AC drives designed to meet the requirements of all variable speed applications from simple, single-motor speed control through to the most sophisticated, integrated multi-drive systems

• V/Hz, Sensorless Vector, Vector and Regen,
• Single Phase 230VAC(1-3HP)
• Three Phase 230VAC(1-60HP)
• Three Phase 460VAC(1-1500HP)
• Three Phase 500VAC(3-125HP)

Parker / SSD 650V Eurotherm AC Drives

The 650V series inverters provide simple, no-fuss speed control of standard three-phase AC motors from 0.3 to 150 HP.

• V/Hz, Sensorless Vector
• Single Phase 230VAC (0.3-2HP)
• Three Phase 230VAC, (3-60HP)
• Three Phase 460VAC (.5-150HP)

Parker / SSD 650 Eurotherm AC Drives

The 650 series inverters provide basic speed control of standard three phase AC motors from 0.3 to 10 Hp (0.25 to 7.5 Kw). They are full of useful features including pre-programmed applications - all designed to simplify set-up, installation and operation.

• V/Hz Single Phase 230VAC(.3-2HP)

• Three Phase 230VAC(3-5HP)
• Three Phase 460VAC(.5-10HP)

Parker / SSD 590+ Eurothem DC Drives

The 590+ Integrator series highly advanced DC drive meets the demands of the most complex motor control applications.

• 3 Phase Regen / Non Regen,
• 600VAC, 575VAC
• 460VAC, 230VAC

Parker / SSD 506/507/508 Eurotherm DC Drives

The 506, 507 and 508 series drives breaks new ground in value for money in DC motor control. Available in 3. 6 and 12A armature ratings the feature packed minimum footprint design is ideal for speed or torque control of permanent magnet or shunt wound DC motors from single-phase supply.

• Single Phase 110VAC,
• Single Phase 220VAC,
• 3-12A

Parker / SSD 512 Eurotherm DC Drives

Isolated control circuitry, a host of user facilities and extremely linear control loop makes the 512C ideal for single motor or multi-drive low power applications. Designed for use on single phase supplies, the 512C is suitable for controlling permanent magnet or wound field DC motors in speed or torque control.

• Single Phase-110VAC, 220VAC, 380VAC, 480VAC,

• 4-32A

Parker / SSD 514 Eurotherm DC Drives

The regenerative 514C DC drive offers full four-quadrant control of DC motors from single phase supplies. As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required.

• Single Phase-110VAC, 220VAC, 380VAC, 480VAC,

• 4-32A