An Authorized distributor of Control Techniques

Commander SE


Commander SE gives you just the features you need...

Reducing complexity and cost is what Control Techniques' new Commander SE microdrive is all about. The SE stands for Simple and Easy..... and it is: SIMPLE to install and EASY to use. With the Commander SE, users need never fight with technology. The drive's first 10 parameters cover most applications easily, quickly and cost effectively.

Key benefits

•	No other microdrive can talk your language so easily courtesy of plug-in communication packages that will include, Profibus-DP, DeviceNet, CAN Open, Interbus.
•	Commander SE's new, Intelligent Thermal Management technology reduces nuisance tripping and ensures minimum motor noise - while fully protecting the drive.
•	The mains dip ride-through feature gives maximum protection against expensive process stoppages

Control Techniques Drives, Commander SE, Emerson AC Drives, VFD

•	When you need ultimate control, Commander SE's Level 3 parameters give the user, via serial
	communications, access to advanced features such as: PID Controller, kW hour meter, 8 preset
	speeds, motorised potentiometer, second motor map and lots more.
•	With true space vector modulation - open loop vector control, full torque down to 1 Hz.
•	Commander SE up to 5 HP, fits 200mm deep cubicles even with footprint EMC filter fitted.
•	Rugged, industrial 122ºF (104ºF for size 5) ambient rating for applications where operating conditions are hot and tough.
•	IP20/NEMA 1, rating for added protection. (NEMA 1 is not applicable to size 5)
•	Fast, accurate drive to drive parameter transfer and storage with the new Quick Key - saves time and
	money.

Key Features

•	1/3 HP to 3 HP, single phase, 208 to 230 V
	1 HP to 5 HP, three phase, 208 to 230 V
	1 HP to 50 HP, three phase, 380 to 480 V
•	Only 10 parameters needed for most applications - level 1
•	Quick installation with convenient cable management
•	Large easy-to-cable power terminals
•	Standard size, pluggable control terminals
•	Integrated braking transistor from 1 HP - 50 HP
•	Level 2 parameters for added flexibility and functionality
•	No spin rotating autotune for fast drive/motor optimization
•	Minimum motor noise with maximum drive protection via unique Intelligent Thermal Management (ITM)
•	RS485 serial communications as standard on all sizes
•	Level 3 parameters for ultimate control. Advanced menus (via serial comms)
•	Complies with power drive systems standard EN 68100-3 for both the first environment "domestic"
	(restricted distribution) and for the second environment 'Industrial sites' with an additional EMC filter.
•	Small enough to fit - big enough to use

Automation Stock / Rome Electric
36 Westside Industrial Blvd.
Rome, GA 30165
Phone:706-413-1560
Fax: 706-232-2071
Email: sales@automationstock.com

See Also:

Model	Frame size	Number of input phases	Supply volts +/-10%	kW rating	hp rating	100% Output current	150% Output current
Model	Frame size	Number of input phases	Supply volts +/-10%	kW rating	hp rating	A	A
SE11200025	1	1	200-240	0.25	0.33	1.5	2.3
SE11200037	1	1	200-240	0.37	0.5	2.3	3.5
SE11200055	1	1	200-240	0.55	0.75	3.1	4.7
SE11200075	1	1	200-240	0.75	1	4.3	6.5
SE2D200075	2	1or 3	200-240	0.75	1	4.3	6.5
SE2D200110	2	1or 3	200-240	1.1	1.5	5.8	8.7
SE2D200150	2	1or 3	200-240	1.5	2	7.5	11.3
SE2D200220	2	1or 3	200-240	2.2	3	10	15
SE23200400	2	3	200-240	4	5	17	25.5
SE23200550	3	3	200-240	5.5	7.5	25	37.5
SE23200750	3	3	200-240	7.5	10	28.5	42.8
SE23400075	2	3	380-480	0.75	1	2.1	3.2
SE23400110	2	3	380-480	1.1	1.5	3	4.5
SE23400150	2	3	380-480	1.5	2	4.2	6.3
SE23400220	2	3	380-480	2.2	3	5.8	8.7
SE23400300	2	3	380-480	3	4	7.6	11.4
SE23400400	2	3	380-480	4	5	9.5	14.3
SE33400550	3	3	380-480	5.5	7.5	13	19.5
SE33400750	3	3	380-480	7.5	10	16.5	24.8
SE43401100	4	3	380-480	11	15	24.5	36.8
SE43401500	4	3	380-480	15	20	30.5	45.8
SE43401850	4	3	380-480	18.5	25	37	55.5
SE53402200	5	3	380-480	22	30	46	69
SE53403000	5	3	380-480	30	40	60	90
SE53403700	5	3	380-480	37	50	70	105

SE55	Quickey / Cloning Module (Commander SE)
SE73	Profibus-DP interface card (Commander SE)
SE73-UG	SE73 (Profibus-DP) User Guide
SE74	Interbus-S interface card (Commander SE)
SE77CO	CANOpen interface card (Commander SE)
SE77CO-UG	SE77CO (CANOpen) User Guide
SE77DN	DeviceNet interface card (Commander SE)
SE77DN-UG	SE77DN (DeviceNet) User Guide
SE-UG	Commander SE Users Guide
SM-CANOPEN	CANOpen Solutions Module
SM-CANOPEN	CANOpen Solutions Module
SM-CANOPEN	CANOpen Solutions Module
SMCO-UG	SM-CANOpen User Guide
SM-DAC	SM Fan and Pump Duty-Assist Preprogrammed Option Module
SM-DEVICENET	DeviceNet Solutions Module
SM-DEVICENET	DeviceNet Solutions Module
SM-DEVICENET	DeviceNet Solutions Module
SMDN-UG	SM-DeviceNet User Guide
SM-ENCODER PLUS	Encoder Plus Solutions Module, provides an additional incremental encoder feedback port.
SMEP-UG	SM-Encoder Plus User Guide
SM-ETC	15 Pin D Shell to 15 pin screw terminal break out board for servo and vector motor encoder feedback cable
SM-ETHERNET	Ethernet TCP/IP Solutions Module
SM-ETHERNET	Ethernet TCP/IP Solutions Module
SM-ETHERNET	Ethernet TCP/IP Solutions Module
SM-EZMOTION	Motion Made Easy Solutions Module, Utilizing PowerTools programming software
SMEZ-UG	SM-EZMotion User Guide
SM-FSC	SM Flying Shear Control Preprogrammed Option Module
SM-HEATSINK DBR1	Braking Resistor, 75 Ohm, 50 Watt, Heatsink mount for Unidrive SP size 1
SM-HEATSINK DBR2	Braking Resistor, 37.5 Ohm, 100 Watt, Heatsink mount for Unidrive SP size 2
SM-I/O LITE	I/O Lite Solutions Module - (1) +/- 10V Bi-polar or 4-20mA input, (3) digital inputs, (1) 0-10V or 4-20mA output, (1) relay output, (1) Incremental Encoder Speed Reference input
SM-I/O LITE	I/O Lite Solutions Module - (1) +/- 10V Bi-polar or 4-20mA input, (3) digital inputs, (1) 0-10V or 4-20mA output, (1) relay output, (1) Incremental Encoder Speed Reference input
SM-I/O LITE	I/O Lite Solutions Module - (1) +/- 10V Bi-polar or 4-20mA input, (3) digital inputs, (1) 0-10V or 4-20mA output, (1) relay output, (1) Incremental Encoder Speed Reference input
SM-I/O PLUS	I/O Solutions Module, High Performance, (2) +/- 10V analog input, (1) +/- 10V output, (3) digital inputs, (3) programmable digital I/O, (2) relay output,
SM-I/O TIMER	I/O Lite Solutions Module w/real time clock for scheduling events, (1) +/- 10V Bi-polar or 4-20mA input, (3) digital inputs, (1) 0-10V or 4-20mA output, (1) relay output, (1) Incl Enc Spd Ref input
SM-I/O TIMER	I/O Lite Solutions Module w/real time clock for scheduling events, (1) +/- 10V Bi-polar or 4-20mA input, (3) digital inputs, (1) 0-10V or 4-20mA output, (1) relay output, (1) Incl Enc Spd Ref input
SM-I/O TIMER	I/O Lite Solutions Module w/real time clock for scheduling events, (1) +/- 10V Bi-polar or 4-20mA input, (3) digital inputs, (1) 0-10V or 4-20mA output, (1) relay output, (1) Incl Enc Spd Ref input
SMIB-UG	SM-Interbus-S User Guide
SM-INTERBUS	Interbus-S Solutions Module
SM-INTERBUS	Interbus-S Solutions Module
SM-INTERBUS	Interbus-S Solutions Module
SM-KEYPAD	LED Keypad, 7 digit LED data display, Configured for Unidrive SP
SM-KEYPAD PLUS	LCD Keypad, back-lit, dual language, on-screen help, remote mountable
SMPB-UG	SM-Profibus User Guide
SM-PELV	PELV Solutions Module - Isolated I/O to NAMUR NE37 specification for chemical industry applications
SM-PELV	PELV Solutions Module - Isolated I/O to NAMUR NE37 specification for chemical industry applications
SM-PELV	PELV Solutions Module - Isolated I/O to NAMUR NE37 specification for chemical industry applications
SM-PROFIBUS	Profibus-DP Solutions Module - Fieldbus Option Only
SM-PROFIBUS	Profibus-DP Solutions Module - Fieldbus Option Only
SM-PROFIBUS	Profibus-DP Solutions Module - Fieldbus Option Only
SM-RESOLVER	Resolver Solutions Module, providing a resolver feedback port, w/simulated encoder output
SM-SERCOS	SERCOS Solutions Module
SM-SLM	SLM Solutions Module
SMUE-UG	SM-Uni Encoder User Guide
SM-UNI ENCODER	Universal Encoder Plus Solutions Module, provides an additional increamental or Absolute encoder feedback port and simulated encoder output.
SM-Winder	SM Speed and Torque Based Centerwind Preprogrammed Option Module
SNCDD-001.5	mso-spacerun: yes> Sync in/out cable, 7 Pin Mini-DIN connector on one end and an 8 Pin Mini -DIN connector on the other, 1.5 ft Length (FM3/4 to FM3/4)

Automation Stock / Rome Electric
36 Westside Industrial Blvd.
Rome, GA 30165
Phone:706-413-1560
Fax: 706-232-2071
Email: sales@automationstock.com

Drives/AC Inverters

Controls

NEMA Motors

Metric Motors

Power Transmission

Safety Products

Services

Industry Links

Commander SE